Choose from three temperature ranges to fulfill a variety of molecular biology, cell and insect culture and entomology studies. Clear acrylic lid allows you to view samples without disturbing internal temperature.
Shakers feature a triple eccentric drive that handles heavy workloads, provides uniform agitation and enables continuous 24-hour operation even at high speeds. Precisely monitor and control chamber temperature over complete range with ±0.1°C accuracy at 37° with PID temperature controller.
Digital Operating System
Solid state DC brushless motor, variable speed control from 15 to 500 rpm and continuous and timed operation from 0.1 hour up to 99.9 hours or 0.1 minute to 99.9 minutes. Displayed time counts up during continuous operation and down during timed runs. View speed, operating time and temperature simultaneously on separate LED displays, which helps minimize errors in establishing running conditions. User adjustable speed calibration can be performed using a hand held digital tachometer where verification is required and protocols can be standardized. Unbalanced load sensor stops platform motor when excess vibration is detected due to unbalanced load. Visual/audible alarm signal until condition is corrected. Visual/audible signals alert you to temperature deviations. Heat turns off if temperature deviates ±1°C of set point. Shaker shut down and audible/visual alarms signal if unit operates ±10% of set speed, preventing shaker from walking. Soft start feature eliminates splashing of vessel contents, wetting of flask closure and helps prevent sudden starts and stops.
Set point retention retains parameters during power failure and restarts unit automatically after power is restored.
RS232 interface allows remote monitoring of speed, time and temperature. Monitor temperature with built-in recorder jack for output to chart recorders for a permanent record. Over temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails.
Safety interlock stops platform motion when the lid is open.
For a complete system, order:
1. Shaker 2. Platform 3. Clamps
Speed Range: 15 to 500 rpm
Orbit Diameter: 0.75"
Maximum load: 50 lbs.
Overall Dimensions: 32 x 22.5 x 22"H
Power: 110V, 50/60Hz
