Total of three modules may be used with the main receiver. The splashproof remote module is supplied with two sensors. Use either the internal one or plug the external one into side of module. External sensor (3/16 inch diameter by 3/4 inch long) and 10-foot cable perform accurately even when both are under water.
Switchable °F/°C range is -58.0 to 158.0°F and -50 to 70.0°C. Resolution is 0.1° and accuracy is ±1°C.
Main unit can receive and display data from 3 different remote sensor modules. May be set to channel 1, 2, or 3. Data is transmitted every 30 seconds. Display’s trend indicator shows whether temperature is rising or falling. Minimum and maximum memory display allows monitoring of conditions over short or long periods, including overnight or weekends. An alarm may be set in 1° increments. The alarm sounds when the temperature rises above or falls below the two set points. Jumbo digits (1-1/8 inches high) may be read from 25 feet. Cases are high-impact, chemical-resistant ABS plastic. Very useful in monitoring the inside of a refrigerator without having to open it. Supplied with one main unit (4-1/4 x 4-1/2 x 5/8 inches, weight 6 oz), one remote sensor module 2-1/3 x 3-1/2 x 3/4 inches, weight 3 oz), internal probe, and external probe/cable. Also supplied with a Traceable® Certificate, flip-open stand, wall bracket, VELCRO to attach to any surface, two AA and two AAA alkaline batteries (batteries operate continuously for eight months).
*With serialized Traceable certificate from an ISO 17025 A2LA accredited Cal lab
